Milwaukee 2966-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench w/ Pin Detent Kit

The MILWAUKEE 2966-22 M18 FUEL ½” High Torque Impact Wrench w/ Pin Detent Kit delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3” in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. The Milwaukee features a patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Pin Detent anvil design maximizes socket retention. The M18 REDLITHIUM™ XC5.0 Resistant Batteries included provide increased protection against oils, greases, & solvents.

Milwaukee 2966-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench w/ Pin Detent Kit Features

• SHORTEST LENGTH 7.3″ for greater access in tight spaces
• UP TO 900 FT-LBS OF FASTENING TORQUE Greater power for the most demanding applications
• GREATER DURABILITY Robust design withstands the most demanding applications on the jobsite
• HIGH QUALITY Battery isolator: secure connection, and controls vibration transmitted to the pack
• POWERSTATE™ Brushless Motor delivers up to 900 ft-lbs of Fastening Torque & 1,100 ft-lbs of Nut-Busting Torque
• UP TO 900 FT-LBS FASTENING TORQUE
• 7.3″ in length provides most access in tight spaces
• Greater Durability – Durability Meets Performance
• Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
• Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
• AUTO-SHUTOFF™ control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
• Lanyard loop included allows for safer use and easier storage
• Mode 1 IPMs: 0 – 1,400; Mode 2 IPMs: 0 – 2,500; Mode 3 IPMs: 0 – 2,700; Mode 4 IPMs: 0 – 2,700
• Mode 1 RPMs: 0 – 700; Mode 2 RPMs: 0 – 1,300; Mode 3 RPMs: 0 – 2,000; Mode 4 RPMs: FWD: 0 – 900, REV: 0 – 2,000 / 0 – 750
• Pin Detent securely locks sockets in place, especially while working overhead
• M18™ REDLITHIUM™ XC5.0 Resistant Batteries included provide increased protection against oils, greases, and solvents
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Compatible with all M18™ batteries & chargers

Milwaukee 2966-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench w/ Pin Detent Kit Includes

• (1) M18 FUEL™ 1/2″ High Torque Impact Wrench w/ Pin Detent (2966-20)
• (2) M18™ REDLITHIUM™ XC5.0 Resistant Battery (48-11-1850R)
• (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)
• (1) Blow Molded Case
• (1) Lanyard Loop

Milwaukee 2966-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench w/ Pin Detent Kit Specifications

• Model 2966-22
• GTIN 00045242601547
• Voltage 18V
• Battery Type 18 Volt Lithium Ion
• Wrench Type High Torque
• Anvil Type Detent Pin
• IPM 0 – 2,700 ipm
• Fastening Torque 900 ft/lbs
• Nut-Busting Torque 1100 ft-lbs
• Power Source Cordless
• Motor Type POWERSTATE Brushless
• Length 7.3 in
• Weight 7 lb
• Height 11.35 in
• Width 3.13 in
• Brushless Yes
• DRIVE CONTROL 4-Mode w/ Auto Shut-Off Mode & Bolt Removal Mode
• RPM Range 0 – 2,000 rpm

Milwaukee 2966-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench w/ Pin Detent Kit Warranty

• 5 Years (Tool), 3 Years (Battery)